Полностью автоматическая шнековая машина для фасовки порошка в биг-бэги по 25 кг

Введение в продукт:

This automatic auger filler packaging machine is a widely used, highly automated open-mouth bagging machine capable of bag feeding, powder filling(weighing feedback with screw metering filling method), bag finishing and sealing. Powder filling is achieved by lifting the bag from the bottom through a screw feed port. The drop is controlled by the lift, minimizing air and dust generation and dispersion, while providing high-precision metering. It is suitable for packaging ultra-fine powders. It is suitable for various packaging materials, including paper bags, plastic bags, coated woven bags, and inner PE bags requiring bag opening bonding (M-fold capability). It is widely used in the chemical, food, pharmaceutical, and new energy industries.

Product parameters：

Equipment composition and function：

①Bag warehouse: When machine starts, sensors confirm that the bags have been placed.

②Bag feeding:The device uses a vacuum suction cup to attach the packaging bag, extract it in place, send it to the bag clamp, and transfer it to the next process. When adsorbing empty packaging bags, the device uses a vacuum switch to confirm that the empty bags have been adsorbed, and then safely transfers them to the bag clamp.

③Bag clamping plate and chute：This unit is used to clamp the edge of the bag conveyed by the feeding bag unit, open the bag mouth filling, clamp the bag cylinder to clamp the edge of the bag, open the bag mouth by narrowing the width of the bag, and then open the bag clamp to fill the bag with material.

④Bag mover: This is a device that moves filled bags to the bag guide components.

⑤Bag guide: This device grabs the top (mouth) of the bag filled with materials delivered by the conveyor belt to prevent the product from crossing with the air and allows the bag to move in the required direction to facilitate the sealing operation.

Summary of features:

1.Automatic/manual switching, self-locking. The manual operation mode is used for maintenance, debugging, or emergency response, while the normal operation mode is automatic.
2.Equipped with IO point comparison: It can provide a detailed understanding of the specific function of each output point of the PLC.
3.Operation monitoring: The equipment has operation monitoring function to ensure the good operation of the equipment.
4.PLC backup point replacement: The equipment has the function of arbitrarily replacing PLC output points to ensure the good operation of the equipment.
5.This machine is equipped with many safety devices for checking and maintaining the normal operating conditions of the machine. Once the machine malfunctions, it immediately emits a roar. At this point, the operation interface of the machine running monitor will detect the location where the fault occurred.
6.When the photoelectric sensor in the bag storage of the bagging machine detects no bags, the alarm will sound a roar and immediately stop the machine operation.
7.When the air pressure drops below 0.40 (MPa), the machine cannot operate normally. The machine emits a roar and immediately stops to ensure the safety of the operator and the machine.
8.The guide bar connected to the bag making guide conveyor belt can squeeze out the air in the bag and send the bag to the sealing machine. Adjust the height of the guide rod on the bag making support frame according to the customer’s needs and the volume and size of the bag.
9.The entire process of bag feeding, grabbing, and opening involves air pressure detection to ensure the success rate of bag placement. If there are any abnormal devices during the entire process, the empty bags will be automatically removed.

Main configuration：